-
Industrial Submersible Drainage Pump Manufacturer – GLFW Sanitary Centrifugal Pump – State Machinery Equipment Manufacturing
Application GLFW series sanitary centrifugal pumps can be widely used in the transportation of various liquid materials, such as dairy products, beer, beverages, medicine, biological engineering, fine chemicals and other fields. It can not only transport ordinary low and medium viscosity solutions, but also transport solutions containing suspended solids or corrosive. Sanitary centrifugal pumps are in the form of single-stage, single-suction, open impellers. The pump casing and impeller are c... -
Single Seal Stainless Steel Centrifugal Magnetic Pump Factory – GC Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction GC water pump falls into the category of single-suction multi-stage segmental centrifugal pump, which is used to transport the clear water or other kinds of liquid with similar physical and chemical properties as clear water. The inlet diameter of this series pump is 40- 100mm, flow 6 -55m³/h,lift head 46- 570m, power 3- 110kW and voltage 380V. Type Designation Performance Parameter -
Industrial Horizontal Split Pump Factory – GLFK Vacuum Discharge Pump – State Machinery Equipment Manufacturing
Product Information Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa. Spec:3m³/h-180m³/h,0.75KW-75KW Material:SUS304,SUS316L 2205 2507 Titanium material Standard: DIN、ISO Impeller: Open type impeller, semi-close type impeller Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted maximum inlet pressure:0.5MPa Temperature range:-10℃ to +140℃(EPDM)... -
Cast Iron Positive Displacement Pump Manufacturer – GLFC Stainless Steel Magnetic Pump – State Machinery Equipment Manufacturing
Product Features Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner... -
Single Seal Water Ring Vacuum Pump Manufacturer – GLFK Vacuum Discharge Pump – State Machinery Equipment Manufacturing
Product Information Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa. Spec:3m³/h-180m³/h,0.75KW-75KW Material:SUS304,SUS316L 2205 2507 Titanium material Standard: DIN、ISO Impeller: Open type impeller, semi-close type impeller Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted maximum inlet pressure:0.5MPa Temperature range:-10℃ to +140℃(EPDM)... -
Single Seal Air Connditioning Pump Manufacturer – GLFZ Axial Flow Evaporating Circulating Pump – State Machinery Equipment Manufacturing
Product Features The horizontal axial flow pump works by using the horizontal thrust along the pump axis direction generated by the rotation of the impeller, so it is also called the horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concent... -
Cast Iron Oil Rotary Vacuum Pump Manufacturer – GLFK Vacuum Discharge Pump – State Machinery Equipment Manufacturing
Product Information Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa. Spec:3m³/h-180m³/h,0.75KW-75KW Material:SUS304,SUS316L 2205 2507 Titanium material Standard: DIN、ISO Impeller: Open type impeller, semi-close type impeller Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted maximum inlet pressure:0.5MPa Temperature range:-10℃ to +140℃(EPDM)... -
Cast Iron Horizontal Split Pump Factory – GLFK Vacuum Discharge Pump – State Machinery Equipment Manufacturing
Product Information Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa. Spec:3m³/h-180m³/h,0.75KW-75KW Material:SUS304,SUS316L 2205 2507 Titanium material Standard: DIN、ISO Impeller: Open type impeller, semi-close type impeller Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted maximum inlet pressure:0.5MPa Temperature range:-10℃ to +140℃(EPDM)... -
Cast Iron Chemical Diaphragm Pump Factory – IHF Series Fluoroplastic Lined Centrifugal Pump – State Machinery Equipment Manufacturing
Structural Features and Purpose IHF centrifugal pump is designed as per the international standard. Its body adopts the metal casing with FEP (F46) inner lining; its bonnet,impeller and bushing all adopt the integrated sintering, pressing and forming with metal insert and fluoroplastic casing while the shaft gland adopts the external bellows mechanical seal; its stator ring adopts 99.9% (alumina ceramics or silicon nitride); its rotary ring adopts F4 packing, which is featured by resistance t... -
Single Seal End Suction Back Pull Out Centrifugal Pump Factory – TPOW Volute Type Horizontally Split Double Suction Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction TPOW series single-stage double-suction split volute centrifugal pump is produced by our company based on importing the advanced technology from Germany in accordance with the market demand. By using the original and modified impeller and cutting, the pump boasts a full and wide range of spectrum and high service efficiency. The water pump can provide the working points of any flow and lift head required by the user within the spectrum performance range. TPOW pump adopts ... -
Single Seal Light Single Stage Centrifugal Pump Manufacturer – DL, DLR Vertical Single and Multistage Segmental Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction DL and DLR pumps fall into the category of vertical single-suction multi-stage segmental centrifugal pumps are used to transport the clear water containing no solid particles or other liquids with similar physical and chemical properties as clear water. It is mainly applicable for high-rise water supply and also for water supply and drainage in factories and mines. The flow range of the transported liquid is 4.9~300m³/h, the lift head range22~239m, the related power range... -
Cast Iron Submersible Sewer Pump Factory – GLFX Forced Circulation Pump – State Machinery Equipment Manufacturing
Product Features GLFX series evaporation forced circulation pump is the latest product developed by our company with years of experience in production, maintenance and application. The application field has expanded from the original caustic soda evaporation to: ammonium phosphate, phosphoric acid, vacuum salt, sprinkling fine, lactic acid, alumina, rutile titanium dioxide, calcium oxide, ammonium oxide, refrigerant, molten salt polyvinyl chloride, waste acid concentration and other industrie...
