-
Cast Iron Submersible Centrifugal Pump Factory – WFB Non-sealed Auto-control Self-Priming Pump – State Machinery Equipment Manufacturing
Product Introduction WFB packing-less auto-control & self priming pump series adopt”linking” multidimensional centrifugal sealing device, being no trouble from running, emitting. dropping and leaking. Compared with similar products, its service life can be prolonged multiple due to without attrition and abrasion of sealing device during operation. This pump is provided with such various functions as temperature,pressure, attrition resistance and one flow diversion for lifetime... -
Industrial Effluent Pump Factory – GLFB series stainless steel self-priming pump – State Machinery Equipment Manufacturing
Product features Self-priming pump is a self-priming centrifugal pump, which has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming capacity. There is no need to install the bottom valve in the pipeline, and only need to ensure that there is quantitative liquid injection in the pump body before working. Different liquids can use different materials of self-priming pump. working principle If the suc... -
Industrial Centrifugal Water Pump Manufacturer – DL, DLR Vertical Single and Multistage Segmental Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction DL and DLR pumps fall into the category of vertical single-suction multi-stage segmental centrifugal pumps are used to transport the clear water containing no solid particles or other liquids with similar physical and chemical properties as clear water. It is mainly applicable for high-rise water supply and also for water supply and drainage in factories and mines. The flow range of the transported liquid is 4.9~300m³/h, the lift head range22~239m, the related power range... -
Single Seal Single Stage Centrifugal Pump Factory – IS Single-Stage Single-Suction Clear Water Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction IS series single-stage single-suction (axial suction) centrifugal pumps are applicable for industrial and city water supply and drainage as well as for the agricultural irrigation and drainage to transport the clear water or other liquids with similar physical and chemical properties as cleat water. The temperature shall not exceed 80℃. The performance range of IS series (calculated by design point) is: Rotation speed: 2900r/min and ]450r/min; Inlet díameter: 50~ 200mm; F... -
Cast Iron Pipeline Booster Pump Manufacturer – GLFC Stainless Steel Magnetic Pump – State Machinery Equipment Manufacturing
Product Features Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner... -
Single Seal Sanitary Centrifugal Pump Factory – TPOW Volute Type Horizontally Split Double Suction Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction TPOW series single-stage double-suction split volute centrifugal pump is produced by our company based on importing the advanced technology from Germany in accordance with the market demand. By using the original and modified impeller and cutting, the pump boasts a full and wide range of spectrum and high service efficiency. The water pump can provide the working points of any flow and lift head required by the user within the spectrum performance range. TPOW pump adopts ... -
Cast Iron Horizontal Centrifugal Pump Factory – LC Vertical Long-Shaft Pump – State Machinery Equipment Manufacturing
Product Introduction LC Vertical Long- Shaft Pump is a leading and well-developed product line developed to meet the domestic market demand through reference to advanced experience in design and manufacture of vertical long-shaft pumps both at home and abroad. It can be used to transport clear water, rain water, iron oxide scale water, sewage, corrosive industrial waste water,seawater and other liquids below 55C; or to transport liquids at90C after specially designed. It’s widely applie... -
Single Seal Rotary Gear Pumps Manufacturer – FY Series Corrosion Resistant Submerged Pump – State Machinery Equipment Manufacturing
Use The FY series submersible pump is a new type of pump produced by improved design based on the traditional corrosion-resistant submerged pump. It integrates the advanced technology of similar products of Sulzer in Switzerland. The unique mechanical seal and the unique structure of the impeller make the pump highly efficient, energy-saving, leak-free and have a long service life.Therefore, it is widely used in chemical, petrochemical, smelting, dyes, pesticides, pharmaceuticals, rare earths... -
Single Seal Gas Transfer Pump Factory – GLFC Stainless Steel Magnetic Pump – State Machinery Equipment Manufacturing
Product Features Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner... -
Single Seal Vertical Centrifugal Pump Factory – D, MD, DG, DF Multi-stage Centrifugal Pump – State Machinery Equipment Manufacturing
Structural MD, D, DG and DF pumps mainly consist of four major parts:stator, rotor, bearing and shaft seal; Stator part; it mainly consists of suction section, middle section,discharge section, guide vane and so on. Those sections are clamped by tension bolts to form a working room. The D pump’s inlet is horizontal and its outlet is vertical; while the DG pump’s both outlet and inlet are vertical. Rotor part: it mainly consists of shaft, impeller, balance disc,bushing and so on. T... -
Industrial Sanitary Pump Manufacturer – GLFX Forced Circulation Pump – State Machinery Equipment Manufacturing
Product Features GLFX series evaporation forced circulation pump is the latest product developed by our company with years of experience in production, maintenance and application. The application field has expanded from the original caustic soda evaporation to: ammonium phosphate, phosphoric acid, vacuum salt, sprinkling fine, lactic acid, alumina, rutile titanium dioxide, calcium oxide, ammonium oxide, refrigerant, molten salt polyvinyl chloride, waste acid concentration and other industrie... -
Single Seal Constant Pressure Tangent Pump Manufacturer – GLFW Sanitary Centrifugal Pump – State Machinery Equipment Manufacturing
Application GLFW series sanitary centrifugal pumps can be widely used in the transportation of various liquid materials, such as dairy products, beer, beverages, medicine, biological engineering, fine chemicals and other fields. It can not only transport ordinary low and medium viscosity solutions, but also transport solutions containing suspended solids or corrosive. Sanitary centrifugal pumps are in the form of single-stage, single-suction, open impellers. The pump casing and impeller are c...
