-
Cast Iron Stainless Steel Centrifugal Water Pump Factory – DL, DLR Vertical Single and Multistage Segmental Centrifugal Pump – State Machinery Equipment Manufacturing
Product Introduction DL and DLR pumps fall into the category of vertical single-suction multi-stage segmental centrifugal pumps are used to transport the clear water containing no solid particles or other liquids with similar physical and chemical properties as clear water. It is mainly applicable for high-rise water supply and also for water supply and drainage in factories and mines. The flow range of the transported liquid is 4.9~300m³/h, the lift head range22~239m, the related power range... -
Cast Iron Axial Pump Factory – GLFK Vacuum Discharge Pump – State Machinery Equipment Manufacturing
Product Information Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa. Spec:3m³/h-180m³/h,0.75KW-75KW Material:SUS304,SUS316L 2205 2507 Titanium material Standard: DIN、ISO Impeller: Open type impeller, semi-close type impeller Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted maximum inlet pressure:0.5MPa Temperature range:-10℃ to +140℃(EPDM)... -
Industrial Horizontal Multistage Centrifugal Pump Factory – LC Vertical Long-Shaft Pump – State Machinery Equipment Manufacturing
Product Introduction LC Vertical Long- Shaft Pump is a leading and well-developed product line developed to meet the domestic market demand through reference to advanced experience in design and manufacture of vertical long-shaft pumps both at home and abroad. It can be used to transport clear water, rain water, iron oxide scale water, sewage, corrosive industrial waste water,seawater and other liquids below 55C; or to transport liquids at90C after specially designed. It’s widely applie... -
Single Seal Home Depot Sewage Pump Factory – WQ, QG Triple-Reamer Cutting Efficient And Non-Clogging Submersible Sewage Pump – State Machinery Equipment Manufacturing
Product Introduction WQ/QG Triple-Reamer Cutting Efficient and Non-Clogging Submersible Sewage Pump is a new type of sewage equipment a cutting system designed and produced on the basis of foreign advanced submersible sewage pump technologies and in accordance with the national standard GB/T24674-2009; Waste submersible motor-pumps. This series of water pumps features these advantages: beautiful appearance, simple structure, strong sewage treatment capacity, high efficiency and energy saving.... -
Cast Iron Horizontal Multi Stage Pump Manufacturer – GLFC Stainless Steel Magnetic Pump – State Machinery Equipment Manufacturing
Product Features Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner... -
Cast Iron Centrifugal Pumps For Sale Manufacturer – BZ, BZH Type Single-Stage Centrifugal and Self-Priming Pumps – State Machinery Equipment Manufacturing
Main Purpose and Range of Application BZ and BZH are single-stage, centrifugal and self-priming pumps, which are applicable for transporting clear water, seawater and other liquids with the similar physical and chemical properties as clear water, The maximum working medium temperature shall not exceed 80℃. They can be widely applied for pumping of water towers, irrigation, drainage and sprinkling irrigation of farmland, and industrial and domestic water supply in cities and rural areas. BZ is... -
Cast Iron Gasonline Pump Factory – GLFW Sanitary Centrifugal Pump – State Machinery Equipment Manufacturing
Application GLFW series sanitary centrifugal pumps can be widely used in the transportation of various liquid materials, such as dairy products, beer, beverages, medicine, biological engineering, fine chemicals and other fields. It can not only transport ordinary low and medium viscosity solutions, but also transport solutions containing suspended solids or corrosive. Sanitary centrifugal pumps are in the form of single-stage, single-suction, open impellers. The pump casing and impeller are c... -
Industrial Lobe Pump Factory – GLFC Stainless Steel Magnetic Pump – State Machinery Equipment Manufacturing
Product Features Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner... -
Single Seal Liquid Ring Vacuum Pump Manufacturer – FY Series Corrosion Resistant Submerged Pump – State Machinery Equipment Manufacturing
Use The FY series submersible pump is a new type of pump produced by improved design based on the traditional corrosion-resistant submerged pump. It integrates the advanced technology of similar products of Sulzer in Switzerland. The unique mechanical seal and the unique structure of the impeller make the pump highly efficient, energy-saving, leak-free and have a long service life.Therefore, it is widely used in chemical, petrochemical, smelting, dyes, pesticides, pharmaceuticals, rare earths... -
Industrial Flouroplastic Lined Centrifugal Pump Manufacturer – LC Vertical Long-Shaft Pump – State Machinery Equipment Manufacturing
Product Introduction LC Vertical Long- Shaft Pump is a leading and well-developed product line developed to meet the domestic market demand through reference to advanced experience in design and manufacture of vertical long-shaft pumps both at home and abroad. It can be used to transport clear water, rain water, iron oxide scale water, sewage, corrosive industrial waste water,seawater and other liquids below 55C; or to transport liquids at90C after specially designed. It’s widely applie... -
Single Seal Paper Pulp Pump Manufacturer – GLFZ Axial Flow Evaporating Circulating Pump – State Machinery Equipment Manufacturing
Product Features The horizontal axial flow pump works by using the horizontal thrust along the pump axis direction generated by the rotation of the impeller, so it is also called the horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concent... -
Cast Iron Multi Stage Fire Pump Factory – XBD-HL(HW) Fire a Constant Pressure Tangent Pump – State Machinery Equipment Manufacturing
Performance and Advantages High efficiency and low energy consumption Low noise Small vibration Reasonable structure Long life Application Scope Water supply for fire hydrant Water supply for spraying system Pressure balancing for fire system Transportation of clean liquid in other occasions Technical Parameters Flow: 5~200L/S Rotation speed : 980~2900r/min Diameter : ф 50~ф300 Temperature range: ≤80℃ Working pressure: ≤1.6MPa
