-
GLFZ Axial Flow Evaporating Circulating Pump
The horizontal axial flow pump works by using the horizontal thrust along the pump axis direction generated by the rotation of the impeller, so it is also called the horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concentration and cooling are used to increase the production capacity of the equipment and increase the heat transfer coefficient of the heat exchanger for forced circulation. Therefore, it can also be called an axial flow evaporative circulation pump.
1. The speed is low, the general speed is within 980r/min, which meets the requirements of the crystallization process and runs smoothly
2. Excellent hydraulic performance, efficiency ≥70% high efficiency area, good anti-cavitation performance
3. Consider that the flow direction of the pump medium is vertically downward and horizontally out. Due to the great influence of the water flow force on the pump shaft, a pump shaft jacket protection device is added in the pump body. The subduction force of the medium is transferred to the pump body, thereby ensuring the stable operation of the pump, greatly reducing the influence of the medium on the force of the mechanical seal, and prolonging the service life of the machine seal. The improvement of this structure has taken a big step in the domestic similar products. In addition, the pump body adopts integral casting with good rigidity, and the intermediate support structure is connected and stable. The horizontal axial flow pump has no guide vanes.
4. The direct connection type has small installation size, low noise, low failure rate and high efficiency. -
FY Series Corrosion Resistant Submerged Pump
The FY series submersible pump is a new type of pump produced by improved design based on the traditional corrosion-resistant submerged pump. It integrates the advanced technology of similar products of Sulzer in Switzerland. The unique mechanical seal and the unique structure of the impeller make the pump highly efficient, energy-saving, leak-free and have a long service life.Therefore, it is widely used in chemical, petrochemical, smelting, dyes, pesticides, pharmaceuticals, rare earths, fertilizers and other industries to transport various non-oxidizing acids that do not contain suspended solid particles, are not easy to crystallize, and whose temperature is not higher than 100 °C on the storage tank. The most ideal equipment for corrosive media such as hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid.
-
GLFX Forced Circulation Pump
GLFX series evaporation forced circulation pump is the latest product developed by our company with years of experience in production, maintenance and application.
The application field has expanded from the original caustic soda evaporation to: ammonium phosphate, phosphoric acid, vacuum salt, sprinkling fine, lactic acid, alumina, rutile titanium dioxide, calcium oxide, ammonium oxide, refrigerant, molten salt polyvinyl chloride, waste acid concentration and other industries.
GLFX series forced circulation pump is developed by integrating the advantages of similar products at home and abroad and soliciting the opinions of engineering and technical personnel who are engaged in evaporation design for a long time.
GLFX series are installed in three forms: mounted on the ground, suspended, floating on the ground.
Sealing structure: combined double end mechanical seal. -
GLFW Sanitary Centrifugal Pump
Application GLFW series sanitary centrifugal pumps can be widely used in the transportation of various liquid materials, such as dairy products, beer, beverages, medicine, biological engineering, fine chemicals and other fields. It can not only transport ordinary low and medium viscosity solutions, but also transport solutions containing suspended solids or corrosive. Sanitary centrifugal pumps are in the form of single-stage, single-suction, open impellers. The pump casing and impeller are c... -
GLFB series stainless steel self-priming pump
The sanitary self-priming pump is specially designed to handle the suction material whose liquid level is lower than the pump inlet and the conveying of fluid material containing a part of the gas. Its self-priming pump casing, pump cover and impeller are all made of high-quality stainless steel 304 or 316L. The motor comes with a stainless steel shroud. The inner surface mirror polishing roughness Ra0.28um. The outer cover is brushed and matt. Fully comply with GMP requirements.
-
GLFK Vacuum Discharge Pump
Application：Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa.
Spec:3m³/h-180m³/h,0.75KW-75KW
Material:SUS304,SUS316L 2205 2507 Titanium material
Standard: DIN、ISO
Impeller: Open type impeller, semi-close type impeller
Surface treatment ：The parts contacted with medium is polished，The rest are matt or sandblasted
maximum inlet pressure:0.5MPa
Temperature range:-10℃ to +140℃(EPDM)
Flushable mechanical sealg:water pressure: Max 0.1MPa
aflow rate:0.25-0.5L/min -
GLFC Stainless Steel Magnetic Pump
Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate through the coupling, the magnetic field can penetrate the air gap and the non-magnetic material isolation sleeve, and drive the inner magnetic rotor connected to the impeller to rotate synchronously, realizing the non-contact synchronous transmission of power, which will easily leak. The dynamic sealing structure is transformed into a static sealing structure with zero leakage. Since the pump shaft and the inner magnetic rotor are completely closed by the pump body and the isolation sleeve, the problems of “running, running, dripping and leaking” are completely solved.The medium contact part is made of stainless steel, which has good corrosion resistance to organic acids, organic compounds, alkalis, neutral solutions and various gases. The double spiral groove carbon right ink bearing has strong wear resistance, ensuring that Long product life, ideal for leak-free transport of corrosive media.
