-
D, MD, DG, DF Multi-stage Centrifugal Pump
Structural
MD, D, DG and DF pumps mainly consist of four major parts:stator, rotor, bearing and shaft seal;
Stator part; it mainly consists of suction section, middle section,discharge section, guide vane and so on. Those sections are clamped by tension bolts to form a working room. The D pump’s inlet is horizontal and its outlet is vertical; while the DG pump’s both outlet and inlet are vertical.
Rotor part: it mainly consists of shaft, impeller, balance disc,bushing and so on. The shaft transmits power to the impeller to make it work; the balance disc is used to balance the axial force; the shaft is .mounted with a replaceable bearing to protect it.
Bearing part: it mainly consists of bearing seat body, bearing,bearing gland and so on. Both ends of the rotor are supported by two single-Tow roller bearings mounted inside the bearing body. Bearings are lubricated with grease. -
DL, DLR Vertical Single and Multistage Segmental Centrifugal Pump
Product Introduction
DL and DLR pumps fall into the category of vertical single-suction multi-stage segmental centrifugal pumps are used to transport the clear water containing no solid particles or other liquids with similar physical and chemical properties as clear water. It is mainly applicable for high-rise water supply and also for water supply and drainage in factories and mines. The flow range of the transported liquid is 4.9~300m³/h, the lift head range22~239m, the related power range 1.5~200kW, and the diameter range40~200mm.
DL and DLR series pumps are applicable for industrial and urban water supply and drainage, pressurization and water supply for high-rise and fire control, long-distance water supply, pressurization of cold and hot water circulation for heating, bathroom and boiler, water supply of air-conditioning refrigeration system, fittings for equipment and so on. The medium working temperature of DL type shall not exceed 80C while that of DLR shall not exceed 120℃. -
GC Centrifugal Pump
Product Introduction
GC water pump falls into the category of single-suction multi-stage segmental centrifugal pump, which is used to transport the clear water or other kinds of liquid with similar physical and chemical properties as clear water. The inlet diameter of this series pump is 40- 100mm, flow 6 -55m³/h,lift head 46- 570m, power 3- 110kW and voltage 380V.
-
GDL Vertical Pipeline Multistage Centrifugal Pump
Product Introduction
This pump is the latest type, which is characterized by energy saving,space effective, easy installation, stable performance and so on. The casing is made of lCr18Ni9Ti top-grade stainless steel while the shaft gland adopts the abrasion-resistance mechanical seal with zero leakage and. a long service life. It solves the axial force with the hydraulic balance so that the pump has stable running with low noise.Its installation conditions are more favorable than those of DL pump because it can be easily installed in the middle of a segment of horizontal pipeline. It can fully meet the need for the water supply and drainage of high-rise buildings, deep wells and mines and the like as well as for the fire fighting facilities. Therefore, it is the optimal type to transport cold and hot water, general media or other liquids with similar physical and chemical properties as water in all major industries.
Working temperature :≤ 100℃ Pressure: ≤ 1.6MPa( 16kg/c㎡)
-
IS Single-Stage Single-Suction Clear Water Centrifugal Pump
Product Introduction
IS series single-stage single-suction (axial suction) centrifugal pumps are applicable for industrial and city water supply and drainage as well as for the agricultural irrigation and drainage to transport the clear water or other liquids with similar physical and chemical properties as cleat water. The temperature shall not exceed 80℃.
The performance range of IS series (calculated by design point) is:
Rotation speed: 2900r/min and ]450r/min;
Inlet díameter: 50~ 200mm;
Flow: 6.3 -~400m³/h;
Lift head: 5~ 125m. -
ISG, YG, TPLB, TPBL, ISW Pipeline Centrifugal Pump Series
Product Introduction
ISG series single-stage single-suction vertical pipeline centrifugal pump is the second generation of high-efficiency energy-saving product designed by our company based on many years of production experience as per the performance parameters stated in the international standard ISO2858 and the national standard JB/T6878.2-93. It is an ideal substitute for normal pumps like SG pipeline, IS and D multi-stage centrifugal pumps. This series has a flow range of 1.5~1600m/h and a lift head. range of5~ 125m, which includes many specifications like basic, diversion and cutting types. According to the differences in working medium and temperature as well as material and structural changes of the flow-through part, it can be designed and manufactured into IRG hot water pump, IHG pipeline chemical pump and YG pipeline oil pump with the same performance parameters. Accordingly, this series can be widely applied to replace the normal centrifugal pump completely to be used in all cases.
-
KTB Refrigeration Air-Conditioner Pump
Product Application
KTB type pump is a single-stage single-suction centrifugal pump specially designed for air conditioning and refrigeration system
-Pumping hot and cold water for heat in and cooling system.
-Pressure boosting system.
-Hot and cold water cycle.
-Liquid transfer in industry, agriculture, horticulture,etc. -
KTZ In-line Air-Conditioner Pump
Product Introduction
KTZ pump combines characteristics of both KTB air conditioning and IZ direct-coupled pumps, with improvements in such aspects as selection of structural materials, bearing and shaft seal. Its economic and technical indicators are equal to those of similar products both at home and abroad.
It’s a type of single-stage single-suction centrifugal pumps,featured by its compact-sized, light weight, high efficiency, low noise,reasonable structure, universality, high reliability and being easy for repair and maintenance.
The noise level of the supporting motor is tower than that of common Y-type motors and close to that of imported motors. -
LC Vertical Long-Shaft Pump
Product Introduction
LC Vertical Long- Shaft Pump is a leading and well-developed product line developed to meet the domestic market demand through reference to advanced experience in design and manufacture of vertical long-shaft pumps both at home and abroad. It can be used to transport clear water, rain water, iron oxide scale water, sewage, corrosive industrial waste water,seawater and other liquids below 55C; or to transport liquids at90C after specially designed. It’s widely applied in industrial and mining enterprises, like water plants, sewage treatment plants,power plants, steel mills and mines, plus municipal water supply and drainage, farmland irrigation, flood control and drainage and other works.
-
LG High-Rise Feed Pump
Product Introduction
LG series pump falls into the category of vertical single-suction multi-stage segmental centrifugal pump to transport the clear water or other kinds of liquid with similar physical and chemical properties as clear water under the normal temperature
LG series pump shall be installed vertically and the motor shaft is connected with the pump shaft by a jaw coupling. With such advantages as compact structure, low noise and space effective, it is mainly applicable for the high-rise water supply, water supply and drainage in factories, mines and enterprises, and water circulation of the low-pressure boiler. -
QJ Well Stainless Steel Submersible Pump
Structure description
1. The deep well submersible pump unit for QJ well is composed of four parts: water pump, submersible motor (including cable), water delivery pipe and control switch. The submersible pump is a single-suction multi-stage vertical centrifugal pump: the submersible motor is a closed water-filled wet, vertical three-phase cage asynchronous motor, and the motor and the water pump are directly connected by a claw or single-barrel coupling; equipped with three different specifications. Core cables; starting equipments are air switches of different capacity grades and self-coupled decompression starters, water pipes are made of steel pipes of different diameters and are connected by flanges, and high-lift electric pumps are controlled by gate valves.
2. A rubber bearing is installed in the guide shell of each stage of the submersible pump; the impeller is fixed on the pump shaft with a conical sleeve; the guide shell is integrated with threads or bolts.
3. The upper part of the high-lift submersible pump is equipped with a check valve to avoid the damage of the unit caused by the shutdown.
4. The upper part of the submersible motor shaft is equipped with a labyrinth-type sand control device and two reversely assembled skeleton oil seals to prevent quicksand from entering the motor.
5. The submersible motor adopts water-lubricated bearings, and the lower part is equipped with a rubber pressure regulating film and a pressure regulating spring to form a pressure regulating chamber to adjust the pressure change caused by temperature; the motor winding is insulated by polyethylene, and the nylon sheath protects against consumer water. The connection method of the magnet wire and the cable is according to the QJ type cable joint process. The joint insulation is removed and the varnish layer is removed, and then the joints are connected well, and the welding is firm, and the raw rubber is used to wrap a layer. Then wrap 2~3 layers of waterproof adhesive tape, and wrap 2~3 layers of waterproof tape on the outside or wrap a layer of rubber tape (inside the bicycle) with water glue to prevent water seepage.
6. The motor is sealed with precision stop bolts, and the cable outlet is sealed with a rubber gasket.
7. There is a water injection hole at the upper end of the motor, a vent hole, and a water drain hole at the bottom.
8. The lower part of the motor is equipped with upper and lower thrust bearings. There are grooves on the thrust bearings for cooling, and it is a stainless steel thrust plate for grinding, which follows the upper and lower axial force of the water pump. -
QJ Well Submerged Motor Pump
Product Introduction
QJ well submersible pump is a water drawing tool submerging in water to work, which integrates the motor and the water pump. It is applicable for drawing the groundwater from the deep well as well as for the water drawing engineering of rivers, reservoirs, channels and so on: mainly for irrigation of farmland, water supply for people and livestock in plateau mountain areas, and water supply and drainage for cities, factories, railways,mines and construction sites.
