-
FZB Type Fluorine Plastic Self-Priming Pumps
Product Introduction
FZB Series fluoroplastic self- priming centrifugal pump, flow components are made by fluorine plastic seal, adopts advanced externally mounted bellows mechanical seal,easy adjustable, A new generation of strong corrosion resistance self-priming pumps,Its high in a 34 meters (medium for water ),common centrifugal pump,water pollution shall be installed, bottom valve inconvenience, Widely used in pickling process,acid and alkali manufacturing,chemical,pesticide.papermaking,electronic industries.
Operating temperature:-20℃~120℃ -
G Type Screw Pump
Dry Operation Protector
This device is used for the protection from dry operation or over-voltage or from the both. Regardless of deficient medium of the pump inlet or over-voltage, this device will cut off the power supply of the motor and wait until it returns to normal to start the motor automatically.
-
I-1B Type Screw Pump(Thick Paste Pump)
Product Introduction
1. I-1B series screw pump is a single-screw transportation pump which utilizes the impulse action generated by the rotation of the spiral groove to transport the liquid or slurry. It is applicable for the special action of the slurry medium, especially widely used in such places as chemical plant, brewery, paper mill, cannery,laboratory and winery,
2.l-1B screw pump includes (a), (b) and (F) types. .
(1).l-1B (a) is applicable for the general slurry medium and neutral food slurry, Its internal parts are made of the general carbon steel and its pump rubber sleeve is made of the general food rubber.
(2).I-1lB (b) is applicable for the concentrated acid. and alkali liquid, which is resistant to the corrosion of acid and alkali liquid.Its internal parts are made of stainless steel and its pump rubber sleeve is resistant to acid and alkali.
(3). I-1B (F) is applicable for the concentrated acid and alkali liquid with high strength and strong resistance. Its internal parts and casing are all made of stainless steel. -
IH Series Single-Stage Single-Suction Chemical Pump
Product Introduction
IH type horizontal single-stage chemical centrifugal pump is a single-stage single-suction cantilever centrifugal pump, its marked rated performance point and size and other effects use the international standard IS02858-1975 (E), which is a kind of replacement for the F type corrosion-resistant pump. A new generation of energy-saving products, this series of chemical centrifugal pumps are designed according to the performance, technical requirements and test methods of energy-saving pumps. It is one of the energy-saving pump products popularized in my country.
IH Series Single-stage Single-suction Chemical Centrifugal Pump are applicable for industrial and city water supply and drainage as well as for the agricultural irrigation and drainage to transport the clear water or other liquids with similar physical and chemical properties as clear water. The temperature shall not exceed 80℃.
The performance range of IH series (calculated by design point) is:
Rotation speed: 2900r/min and 1450r/min
Inlet diameter: 50~200mm
Flow: 6.3~400m/h
Lift head: 5~125m -
IHF Series Fluoroplastic Lined Centrifugal Pump
Structural Features and Purpose
IHF centrifugal pump is designed as per the international standard. Its body adopts the metal casing with FEP (F46) inner lining; its bonnet,impeller and bushing all adopt the integrated sintering, pressing and forming with metal insert and fluoroplastic casing while the shaft gland adopts the external bellows mechanical seal; its stator ring adopts 99.9% (alumina ceramics or silicon nitride); its rotary ring adopts F4 packing, which is featured by resistance to corrosion and abrasion as well as excellent and reliable seal ability. This pump is applicable for transporting the medium with strong corrosion in rigid conditions including any concentrations of sulphuric acid, hydrochloric acid, acetic acid, hydrofluoric acid, nitric acid,aqua regia, strong alkali, strong oxidizer, organic solvent and reducer. It is one of the latest corrosion-resistance units in. the world at present. Its biggest advantages include advanced and reasonable structure, strong resistance to corrosion, airtight and reliable seal ability, stable operation, low noise and long service life.
-
QBY Pneumatic Diaphragm Pump,DBY Dynamic Diaphragm Pump
Product Introduction
This series of diaphragm pump is the latest type at home currently. It can be used to pump and suck up all liquids including various corrosive liquids, volatile, inflammable, explosive and virulent liquids with grains and high viscosity, ceramic glaze slurry, berry and glue or for the bottom oil recovery of oil tanker and temporary tank dumping. Its performance parameters are similar as those of German WLLDENPUMPS and American MARIOWPUMPS. The flow-through parts of’ the pump body adopt four kinds of materials: stainless steel, fluorine rubber, neoprene and Chemigum fluorine lining.
QBY series pneumatic diaphragm pump adopts the compressed air,steam and industrial waste gas as the power supply, whose suction lift is 7m,lift head 0-55m and flow 0.8- 40m³/h, being step-less adjustable.
DBY electric pump adopts the Y and YB motors as the power supply,whose suction lift is 6-8m, lift head 15-130m and flow 2-40m³/h. -
Single-Stage Single Suction Chemical Centrifugal Pump
Product Introduction
Single stage single suction chemical centrifugal pump is suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage.Can transport water or other liquids with similar physical and chemical properties, temperature not higher than 80℃.
-
SK Series Water Ring Vacuum Pump
Product Introduction
SK series water ring vacuum pumps and. compressors are used to pump or compress air and other noncorrosive and water- insoluble gas not containing solid particles, so as to form up vacuum and pressure within closed container.But the gas sucked in allows a little mixture of liquid.
SK water ring vacuum pumps and compressors are widely used in the fields of machinery, petrochemical, pharmaceuticals, foodstuff, sugar production and electronics. As in the process of operation, the compression of gas is isothermal, there is hardly any risk upon compressing and pumping explosive gas, making them more widely accepted. -
SZ Series Water Ring Vacuum Pump
Product Introduction
SZ series water ring type vacuum pumps and compressors are used to pump or compress air and other noncorrosive and water-insoluble gas not containing solid particles, SO as to form up vacuum and pressure within closed container. But the gas sucked in allows a little mixture of liquid, They are widely used. in the fields of machinery, petrochemical, pharmaceuticals,foodstuff, sugar production and electronics.
As in the process of operation, the compression of gas is isothermal,there is hardly any risk upon compressing and pumping inflammable and explosive gas, making them more widely accepted. -
SZB Series Water Ring Vacuum Pump
Product IntroductionSZB vacuum pumps are cantilever and water ring type vacuum pumpsused to pump air or other noncorrosive and water-insoluble gas notcontaining solid particles. Minimum suction pressure is -0.086MPa. They arewidely used in the industries of machinery, petroleun, chemical,pharmaceuticals, foodstuff and so on, and are especially suitable for large-scale water diversion. -
Vacuum Discharge Pump
Technical ParameterApplication: Belong to a turbine the diversion centrifugal pump can extract the liquid of the vacuum tank under the pressure of negative pressure 0.09Mpa.Spec: 3T-180T, 0.75KW-75KW.Material: SUS304, SUS316L (the pump body,pump cover,impeller which is contact with medium material ,made of stainless steel SUS316L and SUSI304Standard: DIN, SMS.Impeller: Open type impeller ,semi-close type impeller.Surface treatment: The parts contacted with medium is polished.Working condition: sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,and has a amount of suction.The max pressure of inlet: 0.5MPa.Temperature range:-10℃ to + 140℃(EPDM).Washable mechanical sealing:water pressure: Max 0.1MPa.Flow rate: O 25-0. 5L /min. -
Water Ring Vacuum Pump And Compressor
Structure and featuresWater ring vacuum pump and compressor is our company in the long-term scientific research, combined with international advanced technology, and continuously practice and verify the development of energy-efficient new products. It can be used for pumping solid particles, insoluble in water, and corrosive gases in order to form vacuum and pressure in a closed vessel. Through changing the structure of the material, can be used for pumping corrosive gases, corrosive liquid, widely used in paper making,chemical, petrochemical, light industry, pharmaceuticals, food, metallurgy, building materials, electrical equipment, coal washing, dressing. chemical fertilizers and other industries.Water ring vacuum pump with the structure of single stage single action,and has the advantages of simple structure, easy maintenance, high efficiency and energy saving, reliable operation and, on the key parts of the pump shaft, an impeller,a distribution plate to optimize the design, both ball iron impeller or stamping welding impeller were after the heat treatment and in hot charging surplus before and after were balanced and dynamic balance checking, operate more stable, more excellent impact resistance, adapted to the large displacement, load and shock of harsh conditions.Water ring vacuum pump, with gas water separator, with multi position into the exhaust port,the pump cover with additional exhaust valve repair window cover,assembly and maintenance more.
